BSP742RIXUMA1 vs BSP752R 비교
다음의 상세 나란히 비교: BSP742RIXUMA1 제조: Infineon 및 BSP752R 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BSP742RIXUMA1 | BSP752R |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.96 | $1.10 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch (N-channel, 1 output) |
| 토폴로지 | 1:1 N-Channel High-Side | — |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| 동작 공급 전압 | 5 V to 34 V | — |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | Requires external series resistor |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| 전류 제한 | [DATA_NEEDED: current limit typical value] | — |
| 열 차단 | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| 패키지 | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-DSO-8-6 (DSO-8-6, exposed pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | -40 °C to +150 °C | -40 C to +150 C (junction) |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| RoHS 상태 | Compliant | Compliant (per distributor listings) |
| Series | — | Classic PROFET 24V |
| 출력 구성 | — | High-side, 1:1 N-Channel |
| Continuous Load Current | — | 1.3 A |
| Load Dump Transient Rating | — | 52 V |
| Operating Voltage Range | — | 5 V to 42 V (12V/24V/42V DC applications) |
| On-State Resistance (Rdson) | — | [DATA_NEEDED: Rdson typ/max in mOhm] |
| Input Logic Compatibility | — | CMOS-compatible, ground-referenced |
| Diagnostic Output | — | Open-drain, overtemperature flag |
| Protection Features | — | Overload, current limit, short circuit, thermal shutdown with auto-restart, ESD |
| Demagnetization | — | Fast internal clamp for inductive loads |
| Technology | — | Smart SIPMOS (monolithic) |
| Target Applications | — | Resistive, inductive, capacitive loads; relays; solenoids; valves; lamps |
| Automotive Qualified | — | Yes (automotive body and lighting applications per Infineon product page) |