BTG70501EPLXUMA1 vs BTH60801EPLXUMA1 비교
다음의 상세 나란히 비교: BTG70501EPLXUMA1 제조: Infineon 및 BTH60801EPLXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTG70501EPLXUMA1 | BTH60801EPLXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.45 | $1.74 |
| Switch Type | High-Side Power Switch (PROFET +2 12V) | — |
| Number of Channels | 1 | 1 |
| Input / Output Ratio | 1:1 | — |
| 출력 구성 | N-Channel High-Side | — |
| Current Limit (Typ.) | 3 A | — |
| Supply Voltage Vcc Range | 2.7 V to 28 V | — |
| Load-Dump Withstand | [DATA_NEEDED: load-dump transient rating] | — |
| On-State Resistance (Typ) | [DATA_NEEDED: Rdson value] | — |
| Operating Temperature (Tj) | -40 C to +150 C | — |
| Diagnostic Functions | Open-load, short-to-GND, short-to-Vbat, overtemperature | — |
| Current Limit Switch (CLS) Mode | Yes (for ADAS / power distribution) | — |
| 패키지 | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | PG-TSDSO-14 (exposed pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 (automotive) | — |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| RoHS 상태 | Compliant | Compliant |
| Lead-Free | Yes | — |
| Product Type | — | Smart High-Side Power Switch |
| 토폴로지 | — | High-Side N-Channel MOSFET with Charge Pump |
| On-State Resistance (RDS(on)) | — | 80 mΩ (typical) |
| Continuous Load Current | — | 2.5 A |
| Operating Voltage Range | — | 4 V to 54 V |
| Nominal Board Net | — | 48 V (PROFET+ 48V family) |
| Current Limitation | — | Adjustable |
| Diagnostic Output | — | Current Sense (IS) pin |
| Input Logic | — | Active High and Active Low |
| Protection Features | — | Overtemperature, Overvoltage, Undervoltage, Short Circuit |
| 동작 온도 범위 | — | -40 °C to +150 °C (Tj) |
| Automotive Qualification | — | AEC-Q100 qualified |