BTG70501EPLXUMA1 vs BTS51202EKAXUMA1 비교
다음의 상세 나란히 비교: BTG70501EPLXUMA1 제조: Infineon 및 BTS51202EKAXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTG70501EPLXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.45 | $1.68 |
| Switch Type | High-Side Power Switch (PROFET +2 12V) | — |
| Number of Channels | 1 | 2 |
| Input / Output Ratio | 1:1 | — |
| 출력 구성 | N-Channel High-Side | — |
| Current Limit (Typ.) | 3 A | — |
| Supply Voltage Vcc Range | 2.7 V to 28 V | — |
| Load-Dump Withstand | [DATA_NEEDED: load-dump transient rating] | — |
| On-State Resistance (Typ) | [DATA_NEEDED: Rdson value] | — |
| Operating Temperature (Tj) | -40 C to +150 C | — |
| Diagnostic Functions | Open-load, short-to-GND, short-to-Vbat, overtemperature | — |
| Current Limit Switch (CLS) Mode | Yes (for ADAS / power distribution) | — |
| 패키지 | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| Qualification | AEC-Q100 (automotive) | — |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| RoHS 상태 | Compliant | Compliant |
| Lead-Free | Yes | — |
| 토폴로지 | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| 동작 온도 | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |