BTS118DATMA1 vs BTS3035TFATMA1 비교
다음의 상세 나란히 비교: BTS118DATMA1 제조: Infineon 및 BTS3035TFATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS118DATMA1 | BTS3035TFATMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.78 | $0.61 |
| Part Number | BTS118DATMA1 | — |
| Manufacturer | Infineon Technologies | — |
| Product Family | Smart SIPMOS Low-Side Power Switch | — |
| 토폴로지 | 1:1 N-Channel Smart Low-Side Switch | — |
| Load Supply Voltage (Vbb max) | 42 V | — |
| Continuous Drain Current | 2.4 A | 5 A |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) typical @ 25C] | — |
| Input Logic Level | CMOS / TTL compatible | — |
| Input Protection | ESD protected | — |
| Thermal Protection | Thermal shutdown with auto-restart | — |
| Overload Protection | Yes | — |
| Short-Circuit Protection | Yes | — |
| Overvoltage Protection | Yes (Vbb transient) | — |
| Current Limitation | Yes | — |
| Status Feedback | Open-drain diagnostic output (shared with IN) | Yes (open-drain diagnostic output) |
| 패키지 | PG-TO252-3-11 (DPAK) | PG-TO252-3-313 (DPAK) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | -40C to +150C (junction) | -40C to +150C (junction) |
| RoHS / REACH | Green product, RoHS compliant, lead-free | — |
| MSL 레벨 | MSL 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL moisture sensitivity level] |
| Product Type | — | Low-Side Power Switch |
| Technology | — | N-Channel MOSFET |
| Number of Channels | — | 1 |
| Input Type | — | CMOS Logic Level |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Reverse Battery Protection | — | Integrated |
| RoHS 상태 | — | Compliant |
| Automotive Grade | — | AEC-Q100 qualified |