BTS3035TFATMA1 vs BTS118DATMA1 비교
다음의 상세 나란히 비교: BTS3035TFATMA1 제조: Infineon 및 BTS118DATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS3035TFATMA1 | BTS118DATMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.61 | $0.78 |
| Product Type | Low-Side Power Switch | — |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | — |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | 2.4 A |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | Open-drain diagnostic output (shared with IN) |
| Reverse Battery Protection | Integrated | — |
| 동작 온도 범위 | -40C to +150C (junction) | -40C to +150C (junction) |
| 패키지 | PG-TO252-3-313 (DPAK) | PG-TO252-3-11 (DPAK) |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | [DATA_NEEDED: MSL moisture sensitivity level] | MSL 3 (per JEDEC J-STD-020) |
| RoHS 상태 | Compliant | — |
| Automotive Grade | AEC-Q100 qualified | — |
| Part Number | — | BTS118DATMA1 |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | Smart SIPMOS Low-Side Power Switch |
| 토폴로지 | — | 1:1 N-Channel Smart Low-Side Switch |
| Load Supply Voltage (Vbb max) | — | 42 V |
| On-State Resistance (RDS(on)) | — | [DATA_NEEDED: RDS(on) typical @ 25C] |
| Input Logic Level | — | CMOS / TTL compatible |
| Input Protection | — | ESD protected |
| Thermal Protection | — | Thermal shutdown with auto-restart |
| Overload Protection | — | Yes |
| Short-Circuit Protection | — | Yes |
| Overvoltage Protection | — | Yes (Vbb transient) |
| Current Limitation | — | Yes |
| RoHS / REACH | — | Green product, RoHS compliant, lead-free |