BTS500101TAEATMA1 vs ISP752TFUMA1 비교
다음의 상세 나란히 비교: BTS500101TAEATMA1 제조: Infineon 및 ISP752TFUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Infineon
BTS500101TAEATMA1 - 40A Smart High-Side Switch | Infineon | 12V Loads
BTS500101TAEATMA1 ✓ 활성
사양 비교
| 파라미터 | BTS500101TAEATMA1 | ISP752TFUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.58 | $1.02 |
| Product Type | Smart High-Side Power Switch (N-channel, 1:1) | Smart High-Side Power Switch |
| 토폴로지 | High-side switch with charge pump | — |
| On-State Resistance R_DS(on) (typ) | 1.0 mΩ | — |
| Maximum Continuous Load Current | 40 A DC (per datasheet family) | — |
| Rated Load Current (per DigiKey listing) | 48 A | — |
| Peak Load Current | 250 A | — |
| Nominal Supply Voltage Vbb | 12 V (automotive) | — |
| Operating Voltage Range | 6 V to 18 V (per family) | — |
| Logic Input Compatibility | 3.3 V / 5 V CMOS/TTL | — |
| Current Sense Output | Yes (IS pin, analog current mirror) | — |
| Protection Features | Overcurrent, Overtemperature, Short-to-GND, Short-to-Battery, Overvoltage | — |
| Diagnostic Feedback | Load current sense + fault flag | — |
| 패키지 | PG-TO-263-7-10 (D2PAK-7) | — |
| 실장 유형 | Surface Mount (exposed thermal pad) | Surface Mount |
| 동작 온도 범위 | -40 °C to +150 °C (junction) | — |
| Automotive Qualification | AEC-Q100 (per Infineon family datasheet) | — |
| RoHS 상태 | Compliant | Compliant |
| Series | — | PROFET™ Industrial |
| Switch Configuration | — | 1:1 (Single channel) |
| 출력 구성 | — | High-Side |
| 출력 유형 | — | N-Channel |
| On-Resistance (Ron) | — | 200 mOhm |
| Continuous Load Current | — | 1.3 A |
| 동작 공급 전압 | — | 6 V to 52 V |
| Input Type | — | Non-Inverting (logic-level) |
| 동작 온도 | — | -30 C to +85 C |
| 패키지 / 케이스 | — | PG-DSO-8-24 (DSO-8 with exposed pad) |
| Fault Protection | — | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage |
| Diagnostic Output | — | Status flag |