BTS70041EPPXUMA1 vs BTS700121ESPXUMA2 비교
다음의 상세 나란히 비교: BTS70041EPPXUMA1 제조: Infineon 및 BTS700121ESPXUMA2 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Infineon
BTS70041EPPXUMA1 - 15A Smart High-Side Switch, PG-TSDSO-14 | Infineon
BTS70041EPPXUMA1 ✓ 활성사양 비교
| 파라미터 | BTS70041EPPXUMA1 | BTS700121ESPXUMA2 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.45 | $2.62 |
| Part Family | HIC-PROFET +2 12V | — |
| Switch Type | High-Side N-Channel Smart Power Switch | — |
| 패키지 | PG-TSDSO-14-22 (14-pin) | PG-TSDSO-24-32 (HTSSOP-24 with thermal pad) |
| Typical R_DS(on) | 4 mOhm at 25 °C | — |
| Nominal Load Current | 15 A (DC) | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | [DATA_NEEDED: Vbb operating range] |
| Load-Dump Robustness | [DATA_NEEDED: load dump rating] | — |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Diagnostic Enable Pin (DEN) | Yes | — |
| Current Sense Output (IS) | Yes (analog proportional to load current) | — |
| Embedded Protection | Over-current, short-circuit, over-temperature, reverse battery | — |
| PWM Capability | Yes (low-duty cycle supported via integrated charge pump) | — |
| 동작 온도 | -40 °C to +150 °C (junction) | — |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | MSL3 (per JEDEC J-STD-020) | — |
| RoHS 상태 | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified | — |
| 기능 | — | Power Switch / Driver 1:1 N-Channel |
| 토폴로지 | — | High-Side |
| Continuous Load Current | — | 31.3 A |
| Family | — | PROFET (Protected FET) |
| Nominal Supply Voltage | — | 13.5 V |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Ron typ @ 25 C] |
| Number of Channels | — | 1 |
| Number of Terminals | — | 24 |
| Terminal Pitch | — | 0.65 mm |
| 동작 온도 범위 | — | -40 C to +150 C |
| Max Junction Temperature | — | 150 C |
| Protection Features | — | Overload, short-circuit, over-temperature, reverse battery, ground loss |
| Diagnostic Output | — | Analog current sense (IS pin) |
| Open-Load Detection | — | Yes (on-state and off-state) |