BTS70081EPAXUMA1 vs BTS441RGATMA1 비교
다음의 상세 나란히 비교: BTS70081EPAXUMA1 제조: Infineon 및 BTS441RGATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS70081EPAXUMA1 | BTS441RGATMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.96 | $2.21 |
| Product Type | Smart High-Side Power Switch (PROFET) | — |
| 토폴로지 | 1:1 N-Channel High-Side Switch | Smart High-Side Switch |
| Continuous Load Current | 10 A | 17 A |
| On-State Resistance (RDS(on) typ.) | 9 mOhm | — |
| 동작 공급 전압 | 6 V to 18 V | — |
| Load-Dump Survival Voltage | 28 V (per AEC-Q100) | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Current Limitation (typ.) | [DATA_NEEDED: IL(LIM) value] | — |
| Diagnostic Output | Open-drain status / current sense | — |
| Protection Features | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss | — |
| 동작 온도 범위 | -40 C to +150 C (Tj) | — |
| 패키지 | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TO263-5-2 (TO-263-5) |
| Package Width | 3.90 mm (TSSOP-14 EP equivalent) | — |
| 실장 유형 | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS 상태 | Compliant | Compliant |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Manufacturer | — | Infineon Technologies AG |
| Part Number | — | BTS441RGATMA1 |
| Switch Type | — | 1:1 N-Channel High-Side |
| 출력 수 | — | 1 |
| Input Type | — | CMOS-compatible, ground referenced |
| Diagnostics | — | Yes (fault feedback) |
| Technology | — | Smart SIPMOS (N-channel vertical FET + charge pump) |
| 핀 수 | — | 5 |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb range, e.g. 6V-42V] |
| On-State Resistance (Rds(on)) | — | [DATA_NEEDED: Rds(on) at 25 C] |
| Over-Current Protection | — | Yes (integrated) |
| Thermal Protection | — | Yes (overtemperature shutdown) |
| Over-Voltage Protection | — | Yes (inductive load clamping) |
| Automotive Qualified | — | Yes (AEC-Q100 automotive grade) |
| Tape and Reel Quantity | — | 1000 (per reel) |