BTT60302EKAXUMA1 vs BTT6020-1ERA 비교
다음의 상세 나란히 비교: BTT60302EKAXUMA1 제조: Infineon 및 BTT6020-1ERA 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTT60302EKAXUMA1 | BTT6020-1ERA |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.92 | $1.55 |
| Manufacturer | Infineon Technologies | — |
| Product Type | Dual-channel high-side power switch (PROFET) | Single-channel Smart High-Side Power Switch (PROFET) |
| 출력 수 | 2 | — |
| Configuration | High-side switch, 1:1 N-channel | — |
| Nominal Operating Voltage | 28 V | — |
| Load Voltage Range | 5 V to 36 V (load-dump tolerant) | — |
| On-State Resistance (per channel, max) | 200 mOhm at Tj=25C | — |
| Continuous Load Current (per channel) | 4 A | — |
| Current Limit (typ) | [DATA_NEEDED: current limit per channel] | — |
| Turn-on / Turn-off Time | 150 us (typ) | — |
| Input Type | CMOS-compatible logic input per channel | — |
| Diagnostic Output | Current-sense analog output | — |
| Protection Features | Short-circuit, over-load, over-voltage, over-temperature, reverse battery | — |
| 동작 온도 범위 | -40C to +150C (Tj) | -40 °C to +150 °C |
| 패키지 | PG-DSO-14-40 EP (14-pin SOIC with exposed pad) | PG-TDSO-14 with Exposed Pad (14-pin) |
| Package Outline | SOIC-14 (0.154 in / 3.90 mm width), EP | — |
| 실장 유형 | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified | — |
| RoHS 상태 | Compliant | — |
| Technology | — | Smart6 (N-channel vertical MOSFET + charge pump) |
| On-State Resistance (typ) | — | 20 mΩ |
| Nominal Load Current (continuous) | — | 7 A |
| Operating Voltage Range (Vbb) | — | 5 V to 42 V (24 V nominal) |
| Load-Dump Transient Rating | — | Up to 42 V / 24 V system |
| Maximum Junction Temperature | — | 150 °C |
| Protection Functions | — | Overcurrent, Short-Circuit (Latch), Overtemperature, Overvoltage clamp, Undervoltage Lockout (UVLO), Reverse Battery |
| Diagnostic Function | — | Current-sense output on DEN pin |
| ESD Protection | — | Yes (IN and DEN pins) |
| Target Application | — | 24V automotive lighting and resistive loads up to 5 x P21W or 1 x 70W |
| AEC-Q100 Status | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |