CD4022BCN vs CD4022BE 비교
다음의 상세 나란히 비교: CD4022BCN 제조: onsemi 및 CD4022BE 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | CD4022BCN | CD4022BE |
|---|---|---|
| 브랜드 | onsemi | Texas Instruments |
| 카테고리 | Logic ICs | Logic ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | CMOS divide-by-8 counter IC | — |
| Counter Architecture | 4-stage Johnson counter | 4-stage Johnson counter |
| Number Of Counter Elements | 1 element | — |
| Counter Bit Count | 4 bit | — |
| Clock Edge | Positive edge | Positive edge |
| Supply Voltage Range | 3.0 V to 15 V | — |
| Decoded Output Count | 8 outputs | — |
| Carry Output | 1 carry-out bit | — |
| Division Ratio | Divide-by-8 | — |
| Logic Family | CD4000 CMOS series | — |
| 패키지 | 16-PDIP | — |
| 실장 유형 | Through-hole | Through-hole |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| 최대 클록 주파수 | [DATA_NEEDED: maximum clock frequency] | — |
| Low-Level Output Current | [DATA_NEEDED: low-level output current] | — |
| High-Level Output Current | [DATA_NEEDED: high-level output current] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | [DATA_NEEDED: maximum power dissipation] |
| RoHS Compliance | [DATA_NEEDED: RoHS status] | — |
| REACH Compliance | [DATA_NEEDED: REACH status] | — |
| Logic Type | — | CMOS counter/divider |
| Number of Decoded Outputs | — | 8 outputs |
| Counter Element | — | 1 element |
| Counter Bits | — | 4 bits |
| Typical Operating Frequency | — | 10 MHz at VDD = 10 V |
| Supply Parametric Ratings | — | 5 V, 10 V, and 15 V |
| Quiescent Current Test Condition | — | 20 V |
| Operating Mode | — | Fully static |
| Output Characteristics | — | Standardized, symmetrical |
| Control Inputs | — | CLOCK, RESET, and CLOCK INHIBIT |
| Package Type | — | 16-PDIP |
| Number of Leads | — | 16 leads |
| Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Output Current | — | [DATA_NEEDED: output current] |
| RoHS 상태 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |