CD4022BE vs CD4022BCN 비교
다음의 상세 나란히 비교: CD4022BE 제조: Texas Instruments 및 CD4022BCN 제조: onsemi. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | CD4022BE | CD4022BCN |
|---|---|---|
| 브랜드 | Texas Instruments | onsemi |
| 카테고리 | Logic ICs | Logic ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Logic Type | CMOS counter/divider | — |
| Counter Architecture | 4-stage Johnson counter | 4-stage Johnson counter |
| Number of Decoded Outputs | 8 outputs | — |
| Counter Element | 1 element | — |
| Counter Bits | 4 bits | — |
| Clock Edge | Positive edge | Positive edge |
| Typical Operating Frequency | 10 MHz at VDD = 10 V | — |
| Supply Parametric Ratings | 5 V, 10 V, and 15 V | — |
| Quiescent Current Test Condition | 20 V | — |
| Operating Mode | Fully static | — |
| Output Characteristics | Standardized, symmetrical | — |
| Control Inputs | CLOCK, RESET, and CLOCK INHIBIT | — |
| Package Type | 16-PDIP | — |
| Number of Leads | 16 leads | — |
| 실장 유형 | Through-hole | Through-hole |
| Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Power Dissipation | [DATA_NEEDED: maximum power dissipation] | [DATA_NEEDED: power dissipation] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | CMOS divide-by-8 counter IC |
| Number Of Counter Elements | — | 1 element |
| Counter Bit Count | — | 4 bit |
| Supply Voltage Range | — | 3.0 V to 15 V |
| Decoded Output Count | — | 8 outputs |
| Carry Output | — | 1 carry-out bit |
| Division Ratio | — | Divide-by-8 |
| Logic Family | — | CD4000 CMOS series |
| 패키지 | — | 16-PDIP |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| 최대 클록 주파수 | — | [DATA_NEEDED: maximum clock frequency] |
| Low-Level Output Current | — | [DATA_NEEDED: low-level output current] |
| High-Level Output Current | — | [DATA_NEEDED: high-level output current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS status] |
| REACH Compliance | — | [DATA_NEEDED: REACH status] |