CP2108-B01-GMR vs CP2108-B03-GM 비교
다음의 상세 나란히 비교: CP2108-B01-GMR 제조: Silicon Labs 및 CP2108-B03-GM 제조: Silicon Labs. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | CP2108-B01-GMR | CP2108-B03-GM |
|---|---|---|
| 브랜드 | Silicon Labs | Silicon Labs |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $4.35 | $3.80 |
| 기능 | USB to Quad UART Bridge Controller | — |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| Number of UART Channels | 4 | — |
| UART Data Rate | 300 baud to 2 Mbaud | — |
| Supply Voltage (VBUS) | 3.0 V to 5.25 V | — |
| Internal LDO Output | 3.3 V (on-chip regulator) | — |
| I/O Voltage (VIO) | 1.8 V to 3.3 V (level shifters) | — |
| GPIO Pins | 16 (GPIO.0 to GPIO.15) | — |
| On-chip OTP Memory | 512 bytes | — |
| Internal Oscillator | 48 MHz (no external crystal required) | — |
| Flow Control | Hardware (RTS/CTS, DTR/DSR) and software (XON/XOFF) | — |
| 패키지 | 64-pin QFN EP, 9 mm x 9 mm | 64-QFN, 9 mm x 9 mm |
| 실장 유형 | Surface Mount | Surface mount |
| 동작 온도 | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| MSL 레벨 | [DATA_NEEDED: MSL Level] | — |
| RoHS 상태 | Compliant | unknown |
| Drivers | Royalty-free VCP drivers (Windows, macOS, Linux) | — |
| Product Type | — | USB 2.0 full-speed to quad-UART bridge controller |
| 공급 전압 | — | 3 V to 3.6 V |
| USB Standard | — | USB 2.0 full-speed |
| UART Channel Count | — | 4 asynchronous serial data buses |
| Digital I/O Count | — | 16 pins |
| Integrated Functions | — | USB function controller, USB transceiver, oscillator, EEPROM, and four UARTs |
| Modem Control | — | Full modem-control signals |
| On-Chip EEPROM | — | Included |
| Customizable USB Vendor ID | — | Supported by on-chip EEPROM |
| Customizable USB Product ID | — | Supported by on-chip EEPROM |
| Customizable Product Description | — | Supported by on-chip EEPROM |
| Package Pin Count | — | 64 pins |
| Host Driver Support | — | Royalty-free drivers |
| Maximum UART Baud Rate | — | [DATA_NEEDED: maximum UART baud rate] |
| USB D+/D- Signaling | — | [DATA_NEEDED: USB data and signaling details] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |