CY7C65213A-32LTXI vs CY7C65213-32LTXI 비교

다음의 상세 나란히 비교: CY7C65213A-32LTXI 제조: Infineon 및 CY7C65213-32LTXI 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Infineon
CY7C65213-32LTXI CY7C65213-32LTXI USB-UART Bridge 32-QFN | Infineon

CY7C65213-32LTXI USB-UART Bridge 32-QFN | Infineon

CY7C65213-32LTXI ✓ 활성

사양 비교

파라미터 CY7C65213A-32LTXI CY7C65213-32LTXI
브랜드 Infineon Infineon
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type USB-to-UART Bridge Controller USB-to-UART bridge controller
USB Specification USB 2.0 Full-Speed (12 Mbps) —
UART Data Rate (max) 3 Mbps —
UART Protocol Support RS232, RS422, RS485 —
GPIO Count 8 8 GPIOs
On-chip Configuration Flash 512 bytes —
패키지 QFN-32 (5x5 mm) 32-QFN
실장 유형 Surface Mount Surface mount
동작 온도 -40C to +85C [DATA_NEEDED: operating temperature range]
Internal 3.3V Regulator Yes —
Internal Oscillator Yes (external crystal optional) —
Supply Voltage (VBUS) 5.0 V (from USB) —
MSL 레벨 [DATA_NEEDED: MSL moisture sensitivity level] —
RoHS 상태 Compliant [DATA_NEEDED: RoHS status]
Lead-Free Yes —
할로겐 프리 [DATA_NEEDED: halogen-free status] —
AEC-Q100 Qualification Not Qualified (industrial grade) —
USB Standard — USB 2.0 Full-Speed
UART Maximum Data Rate — 3 Mbps
Serial Interface Support — RS232/RS422
Package Dimensions — 5 mm × 5 mm
USB Suspend Support — SLEEP# asserted during USB suspend
Power Architecture — Fully integrated USB-to-UART bridge
Legacy UART Upgrade — Supports upgrading UART-based devices to USB
Operating Voltage — [DATA_NEEDED: operating voltage]
UART Electrical Levels — [DATA_NEEDED: UART logic levels]
Clock or Crystal Requirement — [DATA_NEEDED: clock or crystal requirement]
USB Bus-Powered Suspend Current — [DATA_NEEDED: suspend current]
REACH Status — [DATA_NEEDED: REACH status]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청