DG442CJ+ vs MAX362EPE 비교
다음의 상세 나란히 비교: DG442CJ+ 제조: Maxim Integrated 및 MAX362EPE 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | DG442CJ+ | MAX362EPE |
|---|---|---|
| 브랜드 | Maxim Integrated | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | Obsolete |
| Number of Circuits | 4 circuits | 4 circuits |
| Switch Configuration | 1:1 SPST | — |
| Contact State | Normally open | — |
| On-Resistance | 85 ohm | — |
| On-Resistance Matching | 4 ohm maximum between switches | — |
| On-Resistance Flatness | 9 ohm maximum over the signal range | — |
| Signal Conduction | Bidirectional | — |
| Switching Behavior | Break-before-make | — |
| Off-Leakage Current | 500 pA | — |
| Switching Time | 170 ns and 250 ns | [DATA_NEEDED: switching time] |
| Technology | CMOS | CMOS |
| 공급 전압 | 15 V maximum | — |
| 핀 수 | 16 pins | — |
| 패키지 | 16-PDIP | 16-pin PDIP |
| Package Width | 7.62 mm (0.300 inch) | — |
| 실장 유형 | Through hole | — |
| Temperature Grade | Commercial grade | Industrial |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| Channel-to-Channel Isolation | [DATA_NEEDED: channel-to-channel isolation] | — |
| RoHS 상태 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Switch Type | — | Single-pole single-throw (SPST) |
| Default Contact State | — | Normally open (NO) |
| Channel-to-Channel Ratio | — | 1:1 |
| On Resistance | — | 85 ohm |
| Package Type | — | PDIP-16 through-hole |
| Package Shape | — | Rectangular |
| Surface Mount | — | No |
| Number of Terminals | — | 16 terminals |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Analog Signal Voltage Range | — | [DATA_NEEDED: analog signal voltage range] |
| On-Resistance Matching Between Channels | — | [DATA_NEEDED: maximum channel-to-channel on-resistance variation] |
| Off Leakage Current | — | [DATA_NEEDED: off leakage current] |
| On Leakage Current | — | [DATA_NEEDED: on leakage current] |
| Control Input Logic Levels | — | [DATA_NEEDED: control input logic thresholds] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |