DRV8806PWPR vs DRV8886ATPWP 비교
다음의 상세 나란히 비교: DRV8806PWPR 제조: Texas Instruments 및 DRV8886ATPWP 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ 활성사양 비교
| 파라미터 | DRV8806PWPR | DRV8886ATPWP |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Motor Drivers | Motor Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $3.20 | $2.04 |
| Number of Channels | 4 (quad low-side) | — |
| 출력 구성 | Low-side DMOS, open drain | — |
| Supply Voltage (VM) | 8.2 V to 38 V | — |
| Continuous Output Current per Channel | 2 A | — |
| Peak Output Current per Channel | 3 A | — |
| RDS(on) per Channel | 200 mOhm (typical) | — |
| 인터페이스 | SPI (serial, 3.3 V logic) | — |
| Open-Load Detection | Yes, via SPI | — |
| 과전류 보호 | Yes, per channel | — |
| 열 차단 | Yes | — |
| Undervoltage Lockout | Yes | — |
| Built-in Clamp Diodes | Yes (freewheeling) | — |
| 동작 온도 | -40C to +85C | — |
| 패키지 | HTSSOP-16 (PWP) with PowerPAD | HTSSOP-24 (PWP) PowerPAD |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | 2 | 2 (per JEDEC J-STD-020) |
| RoHS 상태 | Compliant | Compliant |
| Motor Type | — | Bipolar Stepper |
| Number of Full H-Bridges | — | 2 |
| Load Voltage Rating (VM max) | — | 37 V |
| Minimum Operating VM | — | 8 V |
| Logic Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Full-Scale Output Current | — | 2 A (per H-bridge, 25°C PCB-dependent) |
| RMS Output Current | — | 1.4 A (24 V, TA=25°C, PCB design-dependent) |
| Peak Output Current | — | 3 A |
| HS + LS On-Resistance (RDSon) | — | 550 mΩ |
| Control Interface | — | STEP / DIR (Hardware GPIO) |
| Microstepping Levels | — | Full to 1/16 step |
| Integrated Current Sense | — | Yes (internal sense, no external resistors) |
| AutoTune / Smart Tune Decay | — | Yes |
| Decay Modes | — | Smart tune, mixed, slow, fast (programmable) |
| Sleep Current | — | 20 µA |
| PWM Chopping Frequency | — | Up to 100 kHz |
| 동작 온도 범위 | — | -40°C to +125°C |
| Temperature Grade | — | Automotive |
| Terminal Finish | — | Nickel-Palladium-Gold |
| Peak Reflow Temperature | — | 260°C |