DS90C402M vs MAX485ESA+ 비교
다음의 상세 나란히 비교: DS90C402M 제조: Texas Instruments 및 MAX485ESA+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | DS90C402M | MAX485ESA+ |
|---|---|---|
| 브랜드 | Texas Instruments | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.10 | $0.92 |
| Device Type | Dual LVDS receiver | — |
| Receiver Configuration | 2 receivers | — |
| Input Threshold Sensitivity | ±100 mV | — |
| Common-Mode Noise Protection | Supported | — |
| Data-Rate Optimization | High data rate | — |
| Power Optimization | Low power | — |
| Interface Pairing | DS90C401 companion device | — |
| 토폴로지 | Dual high-speed point-to-point interface | — |
| 패키지 | 8-lead SOIC | 8-SOIC (SOIC-8) |
| Package Family | SOIC surface-mount package family | — |
| 핀 수 | 8 | — |
| 동작 공급 전압 | [DATA_NEEDED: operating supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| Differential Input Termination | [DATA_NEEDED: input termination requirement] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant (per Maxim/ADI datasheet suffix '+') |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| 실장 유형 | Surface mount | Surface Mount |
| 기능 | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| 공급 전압 | — | 4.75 V to 5.25 V (5 V nominal) |
| 데이터 속도 | — | 2.5 Mbps |
| Supply Current (unloaded) | — | 120 µA to 500 µA |
| Receiver Hysteresis | — | 70 mV (typ) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold (V_TH) | — | -0.2 V min / +0.2 V max |
| ESD Protection (HBM, driver output) | — | ±15 kV (per datasheet) |
| Unit Load | — | 1/8 (up to 256 transceivers on bus) |
| 동작 온도 | — | -40 °C to +85 °C |