DS90LV017ATM vs DS90LV017ATM-NS 비교

다음의 상세 나란히 비교: DS90LV017ATM 제조: Texas Instruments 및 DS90LV017ATM-NS 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
DS90LV017ATM DS90LV017ATM - 600Mbps LVDS Driver | Texas Instruments

DS90LV017ATM - 600Mbps LVDS Driver | Texas Instruments

DS90LV017ATM ✓ 활성
Texas Instruments
DS90LV017ATM-NS DS90LV017ATM-NS - 600 Mbps LVDS Driver | Texas Instruments

DS90LV017ATM-NS - 600 Mbps LVDS Driver | Texas Instruments

DS90LV017ATM-NS ✓ 활성

사양 비교

파라미터 DS90LV017ATM DS90LV017ATM-NS
브랜드 Texas Instruments Texas Instruments
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Device Type Single high-speed differential LVDS driver —
Technology EIA-644-A and TIA-644-A —
공급 전압 3.3 V 3.3 V
Maximum Data Rate >600 Mbps >600 Mbps
최대 클록 주파수 >300 MHz >300 MHz
Output Architecture Current-mode differential driver Current-mode differential driver
Short-Circuit Fault Current Minimized Minimized; exact current not stated
Power Dissipation Behavior Designed to remain low at high frequency —
동작 온도 범위 -40°C to 85°C [DATA_NEEDED: operating temperature range]
패키지 8-pin SOIC narrow 8-lead SOIC
핀 수 8 pins —
실장 유형 Surface mount Surface mount
Number of Drivers 1 driver —
출력 유형 LVDS differential output —
Logic Supply Current [DATA_NEEDED: logic supply current] —
Differential Output Voltage [DATA_NEEDED: differential output voltage] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Slew Rate [DATA_NEEDED: output slew rate] —
RoHS 상태 unknown —
REACH Status unknown —
Product Type — Single LVDS differential line driver
Number of Channels — 1 channel
Logic Input Style — 1/0 driver
Typical Differential Output Swing — ±355 mV
Typical Differential Skew — 0.3 ns
Maximum Differential Skew — 0.7 ns
Maximum Propagation Delay — 1.5 ns
PCB Layout — Flow-through pin arrangement
RoHS Compliance — [DATA_NEEDED: RoHS status]
REACH Compliance — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청