EPC16QC100-TAAC80 vs EPC16QC-100T 비교

다음의 상세 나란히 비교: EPC16QC100-TAAC80 제조: Altera 및 EPC16QC-100T 제조: Altera. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 EPC16QC100-TAAC80 EPC16QC-100T
브랜드 Altera Altera
카테고리 Memory ICs Memory ICs
수명 주기 상태 Obsolete Obsolete
재고 상태 In Stock In Stock
단가 (USD) $25.20 $14.50
메모리 유형 Flash (non-volatile configuration) Flash Configuration PROM (in-system programmable)
Memory Density 16 Mbit 16 Mbit (2 Mbyte)
Configuration Modes FPP, PS, AS, JTAG Serial (single device), Parallel (two cascaded devices)
Data Compression Yes (built-in, 30-55% file size reduction) —
Supply Voltage (VCC) 3.3 V —
I/O Voltage Tolerance 1.8 V / 2.5 V / 3.3 V / 5 V —
Supported FPGA Families Stratix, APEX II, APEX 20K, Mercury, ACEX 1K, FLEX 10K Stratix, APEX II, APEX 20K, Mercury, ACEX 1K, FLEX 10K
JTAG Support IEEE 1149.1 boundary scan, in-system programmable —
패키지 100-pin PQFP (Plastic Quad Flat Pack), 20x14 mm 100-pin PQFP (20 x 14 mm), 0.65 mm pitch
Package Code QC100 —
Packaging Style Tape and Reel (TAAC80 suffix) —
동작 온도 -40C to +85C (industrial) [DATA_NEEDED: Operating temperature range]
Configuration Controller Internal (integrated with flash array) —
핀 수 100 —
실장 유형 Surface Mount Surface Mount
Configuration Data Width — 8-bit or 16-bit (cascaded dual-device mode)
Data Compression Support — Yes (35% to 55% bitstream reduction typical)
JTAG / Boundary Scan — IEEE 1149.1 compliant, in-system programmable
공급 전압 — 3.3 V
Cascade Interface — nCE / nOE handshake for multi-device chains
Programming Interface — JTAG (IEEE 1149.1) and serial
Endurance — [DATA_NEEDED: Program/erase cycle rating]
Data Retention — [DATA_NEEDED: Data retention specification]
RoHS 상태 — unknown
Lead-Free — unknown
MSL 레벨 — [DATA_NEEDED: Moisture sensitivity level]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청