EPC2-TC32 vs EPC1TI32 비교

다음의 상세 나란히 비교: EPC2-TC32 제조: Intel 및 EPC1TI32 제조: Altera. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 EPC2-TC32 EPC1TI32
브랜드 Intel Altera
카테고리 Memory ICs Memory ICs
수명 주기 상태 최종 구매 Obsolete
재고 상태 In Stock In Stock
단가 (USD) $15.90 $9.95
메모리 유형 EPROM (OTP/UV-erasable configuration PROM) FPGA Configuration PROM (Serial, OTP)
메모리 크기 1.6 Mbit —
인터페이스 유형 Serial —
메모리 구성 Serial bitstream output —
Programmability In-System Programmable (ISP) via JTAG (IEEE 1149.1) —
공급 전압 3.3 V 3.3 V (derived from VCCIO of target FPGA)
동작 온도 범위 0C to +70C (Commercial) —
패키지 32-pin TQFP (7x7 mm) 32-pin TQFP (7 x 7 mm)
실장 유형 Surface Mount Surface Mount
Supported FPGA Families Stratix I/II, Cyclone I/II, APEX 20K/II, Mercury, ACEX 1K, FLEX 10K —
Configuration Mode Serial (FPP/MSD via FPGA master/slave) —
Output Control OE and nCS gating internal tri-state buffer —
Internal Oscillator Yes (drives address counter) —
MSL 레벨 MSL 3 (168 hours) [DATA_NEEDED: MSL level]
RoHS 상태 [DATA_NEEDED: RoHS status - datasheet does not specify in retrieved snippet] [DATA_NEEDED: rohs status from datasheet]
Lead-Free [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
Memory Density — 1 Mbit (1,046,496 bits)
인터페이스 — Altera 4-pin serial (DCLK, DATA, nCONFIG, nSTATUS)
Programming Interface — JTAG (IEEE 1149.1)
동작 온도 — -40 C to +85 C (industrial)
Compatible FPGAs — ACEX 1K, FLEX 10K, FLEX 6000, MAX 9000
Replacement For — EPC1064, EPC1441
Configuration Software — Quartus II, MAX+PLUS II
Programming Hardware — MasterBlaster / ByteBlasterMV / USB-Blaster

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청