EPC4QC100T vs EPC4QQC100C 비교
다음의 상세 나란히 비교: EPC4QC100T 제조: Altera 및 EPC4QQC100C 제조: Altera. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | EPC4QC100T | EPC4QQC100C |
|---|---|---|
| 브랜드 | Altera | Altera |
| 카테고리 | Memory ICs | Memory ICs |
| 수명 주기 상태 | NRND | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $10.25 | $10.45 |
| 메모리 유형 | Flash configuration PROM (non-volatile) | — |
| Memory Density | 4 Mbit | 4 Mbit |
| Configuration Interface | Serial / x8 Parallel (selectable) | — |
| Maximum Serial Clock Frequency | 66 MHz | — |
| Supported FPGAs | Altera/Intel Cyclone, Stratix, APEX families | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typ) | — |
| I/O Voltage (VCCIO / MultiVolt) | 1.8 V / 2.5 V / 3.3 V / 5.0 V | — |
| In-System Programming | IEEE 1149.1 JTAG + serial interface | — |
| JTAG Support | Yes (1149.1 boundary-scan compliant) | — |
| Configuration Modes | Serial (1-bit) and Parallel (x8) | — |
| Daisy-Chain Support | Yes (EPC4-to-EPC4 only) | — |
| 패키지 | 100-pin PQFP (Plastic Quad Flat Pack), 20 x 14 mm | 100-pin PQFP (20x14 mm) |
| 동작 온도 | -40 C to +85 C (industrial) | — |
| 실장 유형 | Surface Mount | Surface Mount |
| Lead-Free / RoHS | Lead-free; RoHS compliance depends on date code | [DATA_NEEDED: lead-free/RoHS status] |
| MSL 레벨 | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| Device Type | — | Enhanced Configuration Device (Configuration PROM) |
| Target FPGAs | — | Altera/Intel SRAM-based LUT FPGAs (Cyclone, Stratix, APEX families) |
| Operating Supply Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typ) |
| Multi-volt I/O Support | — | 1.8 V / 2.5 V / 3.3 V (FPGAs with multi-volt configuration ports) |
| Configuration Modes Supported | — | FPP, PS, AS via cascading |
| JTAG / ISP Support | — | Yes (IEEE 1149.1 boundary-scan) |
| Cascade Support | — | Yes (for >4 Mbit FPGA bitstreams) |
| 동작 온도 범위 | — | 0 C to +85 C (commercial) |
| Speed Grade | — | -C (commercial) |
| Programming Tool | — | Quartus Programmer / Altera JTAG tools |
| Programming Voltage | — | 3.3 V (in-system, no external VPP required) |