ICM7228DIJI vs ICM7228AIPIZ 비교
다음의 상세 나란히 비교: ICM7228DIJI 제조: Intersil 및 ICM7228AIPIZ 제조: Renesas Electronics. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Renesas Electronics
ICM7228AIPIZ - 8-Digit LED Display Driver | Renesas 28-PDIP
ICM7228AIPIZ ⚠ 최종 구매사양 비교
| 파라미터 | ICM7228DIJI | ICM7228AIPIZ |
|---|---|---|
| 브랜드 | Intersil | Renesas Electronics |
| 카테고리 | LED Drivers | LED Displays |
| 수명 주기 상태 | Obsolete | 최종 구매 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.40 | $10.75 |
| 기능 | 8-digit, microprocessor-compatible LED display decoder driver | 8-Digit LED Display Decoder Driver |
| Number of Digits | 8 | — |
| Display Type | 7-segment numeric LED (common anode or common cathode) | Common-Cathode 7-Segment LED |
| 인터페이스 | Parallel 8-bit microprocessor-compatible | 8-bit parallel write-only |
| On-chip Memory | 8 x 8 static RAM | — |
| Decoder Type | Two on-chip 7-segment decoders (hex/BCD selectable) | — |
| Multiplex Circuitry | Internal scan oscillator and digit drivers | — |
| Segment Drivers | Integrated, internal current regulation | — |
| 공급 전압 | [DATA_NEEDED: typical operating VDD] | — |
| 공급 전류 | [DATA_NEEDED: quiescent IDD] | — |
| Segment Output Current | [DATA_NEEDED: per segment drive capability] | Up to 30 mA per segment (programmable) |
| Intensity Control | Hardware/software intensity adjustment | — |
| Blanking | Leading-zero suppression supported | — |
| 동작 온도 | -40C to +85C (industrial) | — |
| 패키지 | 28-pin PDIP (J) | 28-pin PDIP (0.600 in / 15.24 mm) |
| 실장 유형 | Through-hole | Through-Hole (DIP) |
| RoHS 상태 | Non-compliant (PDIP, SnPb lead finish typical) | — |
| Number of Digits Driven | — | 8 |
| Decode Mode | — | BCD code, Code B (hex) selectable |
| Technology | — | CMOS |
| Supply Voltage (V+) | — | 5 V (typical) |
| Digit (Common) Sink Current | — | Up to 320 mA peak per digit |
| On-chip Oscillator | — | Yes, single external resistor sets frequency |
| 동작 온도 범위 | — | -20 C to +85 C (Industrial) |
| MSL 레벨 | — | 1 (unlimited) |
| Decode Variants | — | A = BCD + Hex (this B/AIPIZ); B = Code B/Code B direct drive |