INA114BU vs INA115AU 비교
다음의 상세 나란히 비교: INA114BU 제조: Texas Instruments 및 INA115AU 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA115AU - 1MHz Precision Instrumentation Amplifier | Texas Instruments
INA115AU ✓ 활성사양 비교
| 파라미터 | INA114BU | INA115AU |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | — |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Input Offset Voltage | 50 uV | — |
| Input Noise Density | 11 nV/√Hz | 11 nV/√Hz |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | — |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 0.06 V/µs |
| Settling Time | 600 ns | — |
| 동작 온도 범위 | -40°C to +85°C | — |
| 패키지 | 16-pin SOIC | 16-pin SOIC (DW) |
| 실장 유형 | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | — |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Device Type | — | Precision instrumentation amplifier |
| Amplifier Count | — | 1 amplifier |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Quiescent Current | — | 3 mA |
| Maximum Offset Drift | — | 0.25 µV/°C |
| Maximum Input Bias Current | — | 2 nA |
| Minimum Common-Mode Rejection | — | 115 dB |
| Input Over-Voltage Protection | — | ±40 V |
| Maximum Supply Voltage | — | ±18 V |
| Minimum Supply Voltage | — | ±2.25 V |
| Gain Control | — | Switched gain |
| 동작 온도 | — | -40 °C to +85 °C |