INA118P vs 118 비교
다음의 상세 나란히 비교: INA118P 제조: Texas Instruments 및 118 제조: Multiple Manufacturer. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA118P - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA118P ✓ 활성
사양 비교
| 파라미터 | INA118P | 118 |
|---|---|---|
| 브랜드 | Texas Instruments | Multiple Manufacturer |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | Unknown |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $14.83 | $0.00 |
| Product Type | Precision, low-power instrumentation amplifier | [DATA_NEEDED: product type - varies by manufacturer prefix] |
| Number of Amplifier Circuits | 1 circuit | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Common-Mode Rejection Ratio | 110 dB minimum at gain 1000 | — |
| Input Bias Current | 5 nA maximum | — |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| 대기 전류 | 350 µA | — |
| Gain Range | 1 to 10000 | — |
| Gain Setting | One external resistor | — |
| Bandwidth | 70 kHz at gain 100 | — |
| Architecture | Three-op-amp design with current-feedback input circuitry | — |
| 패키지 | 8-pin plastic DIP | [DATA_NEEDED: package] |
| 실장 유형 | Through-hole | [DATA_NEEDED: mounting type] |
| 동작 온도 | -40°C to +85°C | [DATA_NEEDED: operating temperature] |
| MPN Identifier | — | 118 (ambiguous - requires manufacturer prefix) |
| Manufacturer | — | [DATA_NEEDED: manufacturer - multiple matches] |
| Operating Voltage | — | [DATA_NEEDED: operating voltage] |
| RoHS 상태 | — | [DATA_NEEDED: rohs status] |
| Lead-Free | — | [DATA_NEEDED: lead-free] |
| MSL 레벨 | — | [DATA_NEEDED: msl level] |
| 핀 수 | — | [DATA_NEEDED: pin count] |
| Marking Code | — | [DATA_NEEDED: marking code] |
| Country of Origin | — | [DATA_NEEDED: country of origin] |
| AEC-Q100 Grade | — | [DATA_NEEDED: aec-q100 grade] |
| Disambiguation Note | — | Search query '118' resolves to multiple unrelated parts: INA118U, TMP118, 74LVC00AD,118, ADS-118MM, AA118, BULK118, VCU118 - verify manufacturer prefix before substituting |