INA122PA vs INA122P 비교
다음의 상세 나란히 비교: INA122PA 제조: Texas Instruments 및 INA122P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ 활성사양 비교
| 파라미터 | INA122PA | INA122P |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Instrumentation amplifier, two-op-amp design | — |
| Number of Channels | 1 | — |
| Supply Voltage Range (Single Supply) | 2.2 V to 36 V | — |
| Supply Voltage Range (Dual Supply) | +/-18 V | — |
| 대기 전류 | 60 uA | 60 µA |
| Input Offset Voltage (max) | 250 uV | — |
| Input Offset Drift (max) | 3 uV/degC | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Gain Range | 5 V/V to 10,000 V/V | — |
| Gain Bandwidth Product | 120 kHz | — |
| Input Common-Mode Range | (V-) - 0.1 V | — |
| Output Swing | Rail-to-rail | Rail-to-rail |
| 패키지 | 8-pin PDIP (P) | 8-pin plastic DIP (8-PDIP) |
| 실장 유형 | Through-hole | Through-hole |
| Supply Type | Single or dual supply operation | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Slew Rate | [DATA_NEEDED: slew rate specification] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | unknown |
| Product Type | — | Precision instrumentation amplifier |
| Architecture | — | Two-op-amp design |
| Supply Voltage Range | — | 2.2 V to 36 V |
| Dual-Supply Range | — | ±18 V |
| Common-Mode Range | — | V− − 0.1 V |
| Low Offset Voltage | — | 250 µV maximum |
| Low Offset Drift | — | 3 µV/°C maximum |
| Circuit Count | — | 1 circuit |
| 동작 온도 | — | −40 °C to +85 °C |
| Application Category | — | Portable medical and data-acquisition instrumentation |
| Signal Type | — | Differential |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |