INA122UA vs INA122U 비교
다음의 상세 나란히 비교: INA122UA 제조: Texas Instruments 및 INA122U 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA122UA - 36V Micropower Instrumentation Amplifier | Texas Instruments
INA122UA ✓ 활성사양 비교
| 파라미터 | INA122UA | INA122U |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Two-op-amp design | Two-op-amp design |
| Number of Channels | 1 circuit | — |
| Single-Supply Voltage Range | 2.2 V to 36 V | — |
| Dual-Supply Voltage Range | +/-18 V | — |
| 대기 전류 | 60 uA | 60 µA typical |
| Gain-Bandwidth Product | 120 kHz | — |
| Input Common-Mode Range | Approximately 0.1 V below the negative supply | — |
| Output Swing | Rail-to-rail | Rail-to-rail output swing |
| Maximum Offset Voltage | 250 uV | — |
| Maximum Offset Drift | 3 uV/degree Celsius | — |
| Noise | [DATA_NEEDED: noise specification] | Low noise |
| Gain Range | [DATA_NEEDED: programmable gain range] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 패키지 | 8-pin SOIC | 8-SOIC |
| 실장 유형 | Surface mount | Surface mount |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Supply Voltage Range | — | 2.2 V to 36 V |
| Single-Supply Operation | — | 2.2 V to 36 V |
| Dual-Supply Operation | — | ±18 V |
| Common-Mode Range | — | (V−) − 0.1 V |
| Offset Voltage | — | 250 µV maximum |
| Offset Drift | — | 3 µV/°C maximum |
| Circuit Count | — | 1 circuit |
| Terminal Count | — | 8 terminals |
| Application Category | — | Portable medical and data acquisition |
| RoHS 상태 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| MSL 레벨 | — | [DATA_NEEDED: MSL level] |