INA125U vs INA125UA 비교

다음의 상세 나란히 비교: INA125U 제조: Texas Instruments 및 INA125UA 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
INA125UA INA125UA - Precision Bridge Instrumentation Amplifier | TI

INA125UA - Precision Bridge Instrumentation Amplifier | TI

INA125UA ✓ 활성

사양 비교

파라미터 INA125U INA125UA
브랜드 Texas Instruments Texas Instruments
카테고리 Amplifier ICs Amplifier ICs
수명 주기 상태 활성 활성
Product Type Instrumentation amplifier with precision voltage reference Instrumentation amplifier with precision voltage reference
Channel Count 1 circuit —
Supply Voltage Range 2.7 V to 36 V 2.7 V to 36 V
Maximum Supply Voltage 36 V 36 V
Gain Range 4 V/V to 10,000 V/V 4 V/V to 10,000 V/V
Gain Setting Single external resistor —
대기 전류 460 µA —
Input Offset Voltage 250 µV maximum —
Input Offset Drift 2 µV/°C maximum —
Voltage Reference 10 V —
Gain Error [DATA_NEEDED: gain error] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection ratio] —
Input Bias Current [DATA_NEEDED: input bias current] —
Bandwidth 150 kHz —
Noise at 1kHz 38 nV/√Hz typical —
Slew Rate [DATA_NEEDED: slew rate] —
Sleep Mode Yes —
패키지 16-pin SOIC 16-pin SOIC
실장 유형 Surface mount Surface mount
동작 온도 [DATA_NEEDED: operating temperature range] —
RoHS 상태 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Number of Channels — 1 circuit
Gain Setting Method — 1 external resistor
Maximum Input Offset Voltage — 250 uV
Input Type — Differential input
Reference — Integrated precision voltage reference
Bridge Excitation — Integrated bridge excitation
Trim Method — Laser trimmed
Minimum Supply Voltage — 2.7 V
동작 온도 범위 — [DATA_NEEDED: operating temperature range]
Input Noise at 1 kHz — [DATA_NEEDED: input noise at 1 kHz]
기준 전압 — [DATA_NEEDED: precision reference voltage]
Common-Mode Input Range — [DATA_NEEDED: common-mode input voltage range]
출력 전압 범위 — [DATA_NEEDED: output voltage range]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청