INA129P vs INA2128P 비교
다음의 상세 나란히 비교: INA129P 제조: Texas Instruments 및 INA2128P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA129P | INA2128P |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Circuit Count | 1 | — |
| 패키지 | 8-pin plastic DIP (PDIP) | 16-pin PDIP (SOL-16) |
| 실장 유형 | Through-hole | Through-hole |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Drift | 0.5 uV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±18 V | plus or minus 18 V |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Architecture | Three-op-amp instrumentation-amplifier design | — |
| Gain Adjustment | Single external resistor | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Temperature Range | -40°C to +85°C | — |
| Low-Power Feature | Low-power instrumentation-amplifier design | — |
| Current Feedback | Yes | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Amplifier Configuration | — | Dual instrumentation amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Internal Architecture | — | 3-op-amp instrumentation amplifier |
| Gain Setting | — | 1 external resistor |
| Input Offset Voltage | — | 50 uV maximum |
| Input Offset Drift | — | 0.5 uV/degree C maximum |
| Input Bias Current | — | 5 nA maximum |
| Common-Mode Rejection | — | 120 dB minimum |
| Input Protection Range | — | plus or minus 40 V |
| Input Circuitry | — | Current feedback |
| Power Class | — | Low power |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |