INA129PA vs INA129A 비교
다음의 상세 나란히 비교: INA129PA 제조: Texas Instruments 및 INA129A 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA129PA | INA129A |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Maximum Input Offset Voltage | 50 uV | — |
| Maximum Input Offset Drift | 0.5 uV/degC | 0.5 µV/°C |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Maximum Protected Input Voltage | -40 V to +40 V | — |
| Wide Supply Range | Plus or minus 18 V | — |
| 동작 온도 범위 | -40 degC to +85 degC | — |
| 패키지 | 8-pin plastic DIP | 8-pin SOIC |
| 실장 유형 | Through-hole | Surface mount |
| Gain-Setting Resistor | 49.4 kilohm | — |
| Gain Equation | [DATA_NEEDED: INA129 gain equation] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| Gain Range | [DATA_NEEDED: gain range] | 1 to 10,000 |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Maximum Output Voltage | [DATA_NEEDED: maximum output voltage] | — |
| 최대 출력 전류 | [DATA_NEEDED: maximum output current] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Supply Range | — | ±18 V |
| Bandwidth at Gain 100 | — | 200 kHz |
| Maximum Offset Voltage | — | 50 µV |
| Minimum Common-Mode Rejection | — | 120 dB |
| Input Protection | — | ±40 V |
| Low-Power Design | — | Low-power general-purpose instrumentation amplifier |
| Input Circuit | — | Current-feedback input circuitry |
| External Gain Setting | — | Single external resistor |
| Application Class | — | Precision analog signal conditioning |