INA129UA vs INA128UG4 비교
다음의 상세 나란히 비교: INA129UA 제조: Texas Instruments 및 INA128UG4 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA129UA | INA128UG4 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Amplifier Circuits | 1 circuit | — |
| Input Offset Voltage | 50 µV maximum | 10 uV |
| Input Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Common-Mode Rejection Ratio | 120 dB minimum | 130 dB |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±18 V maximum | ±2.25 V to ±18 V |
| Minimum Total Supply Voltage | 4.5 V | — |
| Maximum Gain | 10,000 V/V | — |
| Minimum Gain | 1 V/V | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Noise at 1 kHz | 8 nV/√Hz typical | — |
| 동작 온도 범위 | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| 패키지 | 8-pin SOIC (D) | 8-pin SOIC, 3.90 mm body width |
| 실장 유형 | Surface mount | Surface mount |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Circuits | — | 1 circuit |
| 대기 전류 | — | 700 uA |
| Gain-Bandwidth Product | — | 1.3 MHz |
| Input Noise Density | — | 8 nV/sqrt(Hz) |
| Slew Rate | — | 4 V/us |
| Typical Supply Voltage | — | ±15 V |
| 핀 수 | — | 8 pins |
| Gain Configuration | — | External gain-setting resistor |
| Input Type | — | Differential |
| Product Description | — | Precision, low-power instrumentation amplifier |