INA131AP-1 vs INA131BP 비교
다음의 상세 나란히 비교: INA131AP-1 제조: Texas Instruments 및 INA131BP 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA131AP-1 | INA131BP |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Precision instrumentation amplifier | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Internal Gain | 100 V/V | — |
| Architecture | 3-op-amp instrumentation amplifier | — |
| Input Offset Voltage | 50 uV maximum | [DATA_NEEDED: input offset voltage] |
| Input Offset Voltage Drift | 0.25 uV/°C maximum | — |
| Input Bias Current | 2 nA maximum | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | 110 dB minimum | [DATA_NEEDED: common-mode rejection ratio] |
| Input Overvoltage Protection | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Total Supply Voltage | 36 V maximum | — |
| Number of Inputs | 2 differential inputs | — |
| 출력 수 | 1 output | — |
| 패키지 | 8-pin PDIP | — |
| 실장 유형 | Through-hole | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Internal Amplifier Count | — | 3 amplifiers |
| Nominal Gain | — | 100 V/V |
| Gain Configuration | — | Fixed gain |
| Supply Voltage Range | — | 2.25 V to 18 V |
| Maximum Total Supply Voltage | — | 50 V |
| Signal Bandwidth | — | 70 kHz |
| Slew Rate | — | 0.7 V/µs |
| Adjustment Method | — | On-chip laser trimming |
| Package Type | — | 8-pin PDIP |
| 핀 수 | — | 8 pins |
| 장착 스타일 | — | Through-hole |
| Temperature Grade | — | Industrial grade |
| Power Supply Rejection Ratio | — | [DATA_NEEDED: power supply rejection ratio] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Quiescent Current per Channel | — | [DATA_NEEDED: quiescent current per channel] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |