INA141PA vs INA141P 비교
다음의 상세 나란히 비교: INA141PA 제조: Texas Instruments 및 INA141P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA141PA - Precision 10/100 V/V Instrumentation Amplifier | Texas Instruments
INA141PA ✓ 활성Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P Unknown사양 비교
| 파라미터 | INA141PA | INA141P |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | Unknown |
| Product Type | Precision instrumentation amplifier | — |
| Gain | 10 V/V or 100 V/V | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation-amplifier design |
| Input Protection | ±40 V | ±40 V |
| Supply Range | ±18 V | ±18 V |
| Offset Voltage | 50 µV maximum | — |
| Offset Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Common-Mode Rejection | 117 dB minimum | — |
| Bandwidth at Gain 100 V/V | 200 kHz | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| 동작 온도 | -40 °C to +85 °C | — |
| 패키지 | 8-pin plastic DIP | 8-pin plastic DIP |
| 실장 유형 | Through-hole | Through-hole |
| Number of Circuits | 1 circuit | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Available Gain Settings | — | 10 and 100 V/V |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 117 dB |
| Bandwidth at Gain 100 | — | 200 kHz |
| 동작 온도 범위 | — | -40 °C to +85 °C |
| Package Pin Count | — | 8 pins |
| Low-Power Supply Current | — | [DATA_NEEDED: maximum quiescent current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |