INA141U vs INA141UA 비교
다음의 상세 나란히 비교: INA141U 제조: Texas Instruments 및 INA141UA 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA141U - Precision Low-Power Instrumentation Amplifier | Texas Instruments
INA141U Unknown사양 비교
| 파라미터 | INA141U | INA141UA |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | Unknown | 활성 |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp design |
| Gain | 10 V/V or 100 V/V | — |
| Gain Accuracy | ±0.05% at G = 10 | [DATA_NEEDED: numeric gain error and tolerance] |
| Offset Voltage | 50 µV maximum | — |
| Offset Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Common-Mode Rejection | 117 dB minimum | — |
| Input Protection | ±40 V | — |
| Supply Range | ±18 V | — |
| Bandwidth | 200 kHz at G = 100 V/V | — |
| 대기 전류 | 750 µA maximum | [DATA_NEEDED: numeric quiescent current] |
| 패키지 | 8-pin SOIC | 8-pin SOIC |
| 동작 온도 | −40°C to +85°C | — |
| RoHS 상태 | Green product; no Sb/Br | [DATA_NEEDED: RoHS compliance status] |
| Input Protection Class | Differential and common-mode inputs protected to ±40 V | — |
| Amplifier Type | — | Instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Selectable Gain | — | 10 V/V or 100 V/V |
| Bandwidth at G=100 | — | 200 kHz |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 117 dB |
| Maximum Protected Input Voltage | — | ±40 V |
| Supply Voltage Range | — | ±18 V |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| 출력 전압 범위 | — | [DATA_NEEDED: output voltage swing range] |
| 동작 온도 범위 | — | [DATA_NEEDED: numeric operating temperature range] |
| Temperature Grade | — | Industrial |
| 실장 유형 | — | Surface mount |
| Terminal Count | — | 8 terminals |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |