INA146UA vs INA117KUG4 비교
다음의 상세 나란히 비교: INA146UA 제조: Texas Instruments 및 INA117KUG4 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA146UA | INA117KUG4 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Precision high-voltage programmable-gain difference amplifier (1 circuit) | — |
| Maximum Differential Gain | 100 V/V | — |
| Gain Configuration | Set with external resistors | — |
| Small-Signal Bandwidth | 550 kHz | — |
| Input Offset Voltage | 5 mV | 1 mV |
| Input Common-Mode Voltage Range | ±15 V | — |
| Supply Voltage Range, Single | 4.5 V to 36 V | — |
| Supply Voltage Range, Dual | ±2.25 V to ±18 V | — |
| 대기 전류 | 570 µA | — |
| Output Current | 15 mA | — |
| 동작 온도 범위 | −40 °C to +125 °C | -40 °C to 85 °C |
| 패키지 | 8-pin SOIC (D), 3.9 mm nominal width | 8-pin SOIC |
| 핀 수 | 8 pins | — |
| 실장 유형 | Surface mount | Surface mount |
| Input Protection | High-voltage capability with inherent input protection | Protected against momentary input-voltage excursions |
| Halogen-Free Status | Compliant | — |
| Country of Origin | Malaysia | — |
| Export Control Classification Number | EAR99 | — |
| Amplifier Type | — | Precision unity-gain difference amplifier |
| Number of Amplifiers | — | 1 circuit |
| Common-Mode Input Voltage Range | — | ±200 V |
| Maximum Gain | — | 1 dB |
| Gain | — | 1 unity |
| Bandwidth | — | 200 kHz |
| Slew Rate | — | 2.6 V/µs |
| Supply Voltage Range | — | ±5 V to ±18 V |
| 공급 전류 | — | 1.5 mA |
| Terminal Count | — | 8 terminals |
| Temperature Grade | — | Industrial |
| Internal Resistor Network | — | Thin-film resistor network |
| RoHS 상태 | — | Compliant |
| 수명 주기 상태 | — | Active |
| Manufacturer Document Page Count | — | 17 pages |
| Detailed Pin Assignment | — | [DATA_NEEDED: detailed pin assignment] |
| Absolute Maximum Supply Voltage | — | [DATA_NEEDED: absolute maximum supply voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |