ISO120SG vs ISO121G 비교
다음의 상세 나란히 비교: ISO120SG 제조: Texas Instruments 및 ISO121G 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ISO120SG | ISO121G |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | Unknown | Unknown |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $471.79 | $160.40 |
| Product Type | Precision low-cost isolation amplifier | Precision isolated amplifier |
| Isolation Architecture | Duty-cycle modulation and demodulation across a 2 pF differential capacitive barrier | — |
| Signal Bandwidth | 60 kHz | — |
| Isolation Voltage Rating | 1500 Vrms | — |
| Nonlinearity | ±0.01% maximum at the precision operating condition | ±0.01% maximum |
| Input Offset Voltage Drift | 150 µV/°C maximum with the specified external-capacitor and reduced-bandwidth condition | — |
| Common-Mode Rejection | High IMR at 60 Hz | — |
| Carrier Frequency | User controlled | User controlled |
| Supply Operation | Bipolar operation | — |
| Number of Circuits | 1 isolation amplifier per package | — |
| Package Information | 16-CDIP according to the DigiKey listing; 24-CDIP with 16 leads according to the Heisener listing | — |
| Package Family | Ceramic dual in-line package (CDIP) | — |
| Partial Discharge Qualification | 100% tested for partial discharge | — |
| External Components | None required for 60 kHz bandwidth; two external capacitors used for specified precision operation | — |
| Synchronization | ISO120 family synchronization feature | — |
| 동작 온도 | [DATA_NEEDED: ISO120SG operating temperature range] | — |
| 공급 전압 | [DATA_NEEDED: ISO120SG supply voltage range] | [DATA_NEEDED: supply voltage range] |
| Input Differential Voltage Range | [DATA_NEEDED: ISO120SG input differential voltage range] | — |
| 출력 전압 범위 | [DATA_NEEDED: ISO120SG output voltage range] | [DATA_NEEDED: output voltage range] |
| RoHS 상태 | [DATA_NEEDED: ISO120SG RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: ISO120SG REACH status] | [DATA_NEEDED: REACH status] |
| Input Signal Range | — | ±10 V |
| Isolation Rating | — | 3500 Vrms partial-discharge tested |
| Differential Capacitive Barrier | — | 2 pF |
| Input Operation | — | Bipolar operation |
| Common-Mode Transient Immunity | — | High at 60 Hz; quantitative value not provided |
| Amplifier Circuit Count | — | 1 circuit |
| Gain | — | [DATA_NEEDED: gain configuration] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Frequency Response | — | [DATA_NEEDED: frequency response] |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| 패키지 | — | 16-CDIP |
| 실장 유형 | — | Through-hole |
| 핀 수 | — | 16 pins |
| AEC-Q100 Qualification | — | Not specified in verified data |