ISO7762FDWR vs MAX14854GWE+ 비교
다음의 상세 나란히 비교: ISO7762FDWR 제조: Texas Instruments 및 MAX14854GWE+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
ISO7762FDWR - 6-Ch Reinforced Digital Isolator, 5kVrms, 100Mbps | TI
ISO7762FDWR ✓ 활성사양 비교
| 파라미터 | ISO7762FDWR | MAX14854GWE+ |
|---|---|---|
| 브랜드 | Texas Instruments | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.74 | $0.00 |
| Isolation Type | Capacitive Coupling (SiO2) | — |
| Number of Channels | 6 | — |
| Channel Direction | 4 Forward, 2 Reverse (4/2) | — |
| Isolation Voltage (RMS) | 5000 Vrms | — |
| Maximum Data Rate | 100 Mbps | 25Mbps |
| Common-Mode Transient Immunity (CMTI) | 85 kV/us (minimum) | — |
| Propagation Delay (typ) | 11 ns | — |
| Channel-to-Channel Skew | 2.5 ns (max) | — |
| Input Supply Voltage Range (each side) | 2.25 V to 5.5 V | — |
| Output Supply Voltage Range (each side) | 2.25 V to 5.5 V | — |
| Default Output State (no VCC1) | Low | — |
| UVLO | Yes (both sides) | — |
| 동작 온도 범위 | -55C to +125C | — |
| 패키지 | 16-pin SOIC Wide-Body (DW) - 7.50mm width | 16-pin WSOIC |
| 실장 유형 | Surface Mount | Surface mount |
| Creepage/Clearance | 8 mm (DW package) | — |
| Safety Approvals | UL 1577, IEC 60747-17 (reinforced), VDE 033 60 (reinforced) | — |
| MSL 레벨 | 2 | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Product Type | — | Isolated full-duplex RS-485/RS-422 transceiver |
| Supply Voltage Range | — | 1.71V to 5.5V |
| Low-Speed Data Rate | — | 500kbps |
| Galvanic Isolation | — | 2.75kV RMS for 60 seconds |
| ESD Protection | — | ±35kV |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Supported Protocols | — | RS-485 and RS-422 |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Isolation Technology | — | [DATA_NEEDED: isolation technology] |
| REACH Status | — | [DATA_NEEDED: REACH status] |