ITS4040DEPDXUMA1 vs ITS4200SSJDXUMA1 비교
다음의 상세 나란히 비교: ITS4040DEPDXUMA1 제조: Infineon 및 ITS4200SSJDXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ITS4040DEPDXUMA1 | ITS4200SSJDXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.12 | $0.98 |
| Product Type | Dual-Channel Smart High-Side Power Switch (PROFET) | — |
| 토폴로지 | 1:1 High-Side (N-Channel MOSFET, two channels) | — |
| Number of Channels | 2 (independent) | — |
| Operating Voltage Range | -0.3 V to 45 V (load-dump tolerant) | — |
| Typical On-State Resistance per Channel (RDS(ON)) | 60 mΩ at TJ = 125 °C | — |
| Continuous Load Current per Channel | >2 A | — |
| Combined Peak Capability | 4.1 A (per datasheet summary) | — |
| Per-Channel Current Limit (typ.) | 2.6 A | — |
| On/Off Input Interface | Logic-level GPIO compatible (3.3 V / 5 V) | — |
| Diagnostic Output | Current-sense (IS) pin, proportional to load current | Status pin for fault feedback |
| Integrated Protection | Over-current, over-voltage, over-temperature, short-to-ground, short-to-battery, reverse battery | — |
| 패키지 | PG-TSDSO-14 (exposed pad) | PG-DSO-8 (DSO-8) |
| 실장 유형 | Surface Mount | Surface Mount |
| Operating Temperature (TJ) | -40 °C to +150 °C (typical automotive PROFET range) | — |
| RoHS 상태 | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET (MINI-PROFET) |
| Switch Type | — | High-Side N-Channel, 1:1 |
| On-State Resistance (R_DS(on)) | — | 200 mOhm (typical) |
| Continuous Load Current | — | 1.2 A |
| Supply Voltage (Vbb) | — | 6 V to 52 V |
| 대기 전류 | — | 0.8 mA |
| Maximum Power Dissipation | — | 1400 mW |
| 동작 온도 | — | -40 C to +150 C |
| 출력 구성 | — | Single high-side switch |
| Protection Features | — | Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown |
| Load Type | — | Resistive and inductive loads |