ITS4130QEPDXUMA1 vs ITS716GFUMA1 비교
다음의 상세 나란히 비교: ITS4130QEPDXUMA1 제조: Infineon 및 ITS716GFUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ITS4130QEPDXUMA1 | ITS716GFUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.88 | $3.22 |
| 토폴로지 | High-Side Power Switch (1:1) | — |
| Number of Channels | 4 (Quad) | 4 |
| On-State Resistance RDS(ON) | 130 mΩ (typ at Tj=25°C), 205 mΩ (typ at Tj=125°C) | — |
| Per-Channel Current | 650 mA (DC, per channel) | — |
| Load-Dump Tolerance | 45 V | — |
| Switch Type | N-Channel MOSFET | — |
| 패키지 | PG-TSDSO-14 (14-pin, exposed pad) | PG-DSO-20-32 (20-pin SOIC, exposed pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 | -40C to +125C (Tj) | — |
| Fault Protection | Over-current, Over-temperature, Over-voltage, Open-load detection | — |
| Diagnostic Output | Yes (status/feedback pin) | Open-drain fault flag, one per channel |
| Reverse Polarity Protection | Achievable with external 150Ω GND resistor or GND diode+27Ω series resistor | — |
| Family | PROFET Industrial (ITS41xxQ-EP-D series) | — |
| Product Status | Active / Production | — |
| RoHS 상태 | Compliant | Compliant |
| MSL 레벨 | MSL3 (per Infineon package handling guidelines) | [DATA_NEEDED: MSL rating] |
| Product Type | — | Smart High-Side Power Switch |
| 출력 구성 | — | High-side (N-Channel MOSFET) |
| Continuous Current per Channel | — | 2.3 A |
| On-State Resistance (RON) per Channel | — | [DATA_NEEDED: Ron typical value] |
| Operating Voltage Range (Vbb) | — | 5 V to 36 V |
| Load Dump Tolerance | — | Up to 45 V |
| Standby Current | — | [DATA_NEEDED: Iq standby typical] |
| Input Logic Levels | — | CMOS/TTL compatible, parallel interface |
| Protection Features | — | Overload, short-circuit, over-temperature, over-voltage, ESD |
| PWM Capability | — | Up to 1 kHz |
| 동작 온도 범위 | — | -40 C to +85 C (industrial grade) |
| 열 저항, 접합-주변 | — | [DATA_NEEDED: theta_JA value] |