KSZ8041NL-AM vs KSZ8041FTL 비교
다음의 상세 나란히 비교: KSZ8041NL-AM 제조: Microchip Technology 및 KSZ8041FTL 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | KSZ8041NL-AM | KSZ8041FTL |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | RF Transceivers | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 기능 | 10BASE-T/100BASE-TX Ethernet PHY transceiver | — |
| 인터페이스 | MII / RMII | — |
| Number of Ports | 1 (1/1 Transceiver, Full) | — |
| 데이터 속도 | 10 Mbps / 100 Mbps | 10 Mb/s to 100 Mb/s |
| 공급 전압 | 3.3 V (single supply) | — |
| Auto MDI/MDI-X | Yes (HP Auto MDI/MDI-X) | — |
| Auto-Negotiation | Yes | — |
| 패키지 | 32-QFN (5x5 mm) with exposed pad | 48-pin TQFP, 7 x 7 mm |
| 실장 유형 | Surface Mount | Surface mount |
| 동작 온도 | -40C to +85C | — |
| Crystal Reference | 25 MHz | — |
| RMII Clock (50 MHz) | External clock source required (per KSZ8041NL design) | — |
| Signaling Distance | Extended (mixed-signal design, per datasheet) | — |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| Power Consumption | Low-power mixed-signal design (per datasheet); [DATA_NEEDED: typical mA value] | [DATA_NEEDED: power consumption] |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Datasheet Document | KSZ8041NL/RNL Data Sheet (Microchip DS00002245B) | — |
| Ethernet Standards | — | 10Base-T, 100Base-TX, 100Base-FX |
| Supply Voltage Range | — | 3.135 V to 3.465 V |
| Supply Type | — | Single supply |
| MAC Interface | — | MII, RMII, SMII |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Crossover Handling | — | HP Auto MDI/MDI-X |
| Terminal Finish | — | Lead-free |
| Shipping Package | — | Tray |
| Product Type | — | 10/100 Ethernet physical-layer transceiver |
| Copper Media Support | — | 10Base-T and 100Base-TX |
| Fiber Media Support | — | 100Base-FX |
| Mixed-Signal Design | — | Yes |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Maximum Signaling Distance | — | [DATA_NEEDED: maximum signaling distance] |
| REACH Status | — | [DATA_NEEDED: REACH status] |