LM2902KAVQPWR vs LM2902PWRG3 비교
다음의 상세 나란히 비교: LM2902KAVQPWR 제조: Texas Instruments 및 LM2902PWRG3 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
LM2902KAVQPWR - 30V Quad Op Amp with 2kV ESD | Texas Instruments
LM2902KAVQPWR ✓ 활성사양 비교
| 파라미터 | LM2902KAVQPWR | LM2902PWRG3 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Number of Amplifiers | 4 circuits | 4 amplifiers |
| Amplifier Type | General-purpose operational amplifier | General-purpose |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| Input Offset Voltage | 2 mV maximum for BA version; 600 uV typical for family | 2 mV |
| ESD Protection | 2 kV for K-suffix devices | — |
| Single-Supply Operating Range | Up to 26 V | — |
| Dual-Supply Operating Range | Plus-and-minus 13 V | — |
| B/BA Version Supply Range | 3 V to 36 V | — |
| Supply-Current Drain | 0.8 mA typical | — |
| Common-Mode Input Voltage | Range includes ground | — |
| Differential Input Voltage Capability | Supported; rating not stated | — |
| Output Swing | Near supply rails; exact limits not stated | — |
| 패키지 | 14-pin TSSOP | 14-pin TSSOP (PW), 4.40 mm width |
| 실장 유형 | Surface mount | Surface mount |
| Lead Pitch | 0.65 mm nominal | 0.65 mm |
| RoHS 상태 | unknown | unknown |
| REACH Status | unknown | unknown |
| AEC-Q100 Qualification | not stated | not_applicable |
| Automotive-Grade Variant | LM2902KVQPWRQ1 identified as a separate ordering option | — |
| Maximum Supply Voltage | — | 26 V |
| Slew Rate | — | 0.5 V/µs |
| Supply Current Drain | — | 0.8 mA typical |
| Supply Configuration | — | Single supply or split supply |
| Packaging | — | Tape and reel (TR) |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Unity-Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |