LM2903AVQDRQ1 vs LM2903AVQDRG4 비교
다음의 상세 나란히 비교: LM2903AVQDRQ1 제조: Texas Instruments 및 LM2903AVQDRG4 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
LM2903AVQDRQ1 - 36V AEC-Q100 Dual Open-Collector Comparator | Texas Instruments
LM2903AVQDRQ1 ✓ 활성사양 비교
| 파라미터 | LM2903AVQDRQ1 | LM2903AVQDRG4 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Differential, general purpose | Dual differential comparator |
| Number of Channels | 2 | 2 channels |
| 출력 유형 | Open-Collector / Open-Drain, Rail-to-Rail | Open-collector |
| Supply Voltage Range, Single | 2 V to 36 V | — |
| Supply Voltage Range, Dual | +/-1 V to +/-18 V | — |
| Input Common-Mode Range | Rail-to-Rail | [DATA_NEEDED: input common-mode range] |
| 공급 전류 | 0.4 mA per channel (distributor specification listing) | [DATA_NEEDED: supply current] |
| Propagation Delay | 1.3 us | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV typical |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Differential Input Voltage Range | [DATA_NEEDED: maximum differential input voltage] | — |
| 동작 온도 범위 | -40 C to +125 C | [DATA_NEEDED: operating temperature range] |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | AEC-Q100 automotive catalog variant |
| ESD Qualification Test | MIL-STD-883, Method 3015 | — |
| 패키지 | 8-SOIC (D), 0.154 in (3.90 mm) body width | 8-SOIC, 0.154 in width and 3.90 mm width |
| 핀 수 | 8 | — |
| 실장 유형 | Surface Mount | Surface mount |
| Supply Voltage Independent Supply Current | Yes, low supply-current drain independent of supply voltage | — |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS status] |
| Lead Finish | [DATA_NEEDED: lead finish / lead-free status] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Dual-Supply Operating Range | — | ±1 V to ±18 V |
| Response Time | — | 0.3 µs |
| Output Current | — | [DATA_NEEDED: output current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |