LM2903DRG4 vs LM2903QPWRG4Q1 비교
다음의 상세 나란히 비교: LM2903DRG4 제조: Texas Instruments 및 LM2903QPWRG4Q1 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
LM2903DRG4 - Dual 30V Open-Collector Comparator | Texas Instruments
LM2903DRG4 ✓ 활성사양 비교
| 파라미터 | LM2903DRG4 | LM2903QPWRG4Q1 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Comparators | 2 | — |
| 출력 유형 | Open-collector | Open-collector, CMOS/MOS/TTL-compatible |
| Supply Voltage Range, Single Supply | 2 V to 30 V | — |
| Maximum Supply Voltage | 30 V | — |
| Supply Voltage Range, Dual Supply | 2 V to 36 V total supply difference | — |
| Differential Input Voltage | ±38 V | — |
| Common-Mode Input Range | Includes ground | — |
| Propagation Delay | 1.3 us | 1.3 us |
| Supply Current Drain | 0.4 mA typical per comparator | — |
| Output Logic Compatibility | TTL, MOS, and CMOS | — |
| 패키지 | 8-pin SOIC | 8-pin TSSOP (PW), 0.173 inch width |
| 실장 유형 | Surface mount | Surface mount |
| Input Pins | 2 differential input pins per comparator | — |
| Output Pins | 2 open-collector output pins | — |
| Supply Pins | VCC and ground | — |
| Automotive Qualification | Not stated in the verified manufacturer information | AEC-Q100 Grade 0 and Grade 1 |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 2 |
| Supply Voltage Range, Single | — | 2 V to 36 V |
| Supply Voltage Range, Dual | — | +/-18 V |
| 공급 전류 | — | 0.4 mA |
| Input Offset Voltage | — | [DATA_NEEDED: maximum input offset voltage at 25 C] |
| Input Bias Current | — | [DATA_NEEDED: maximum input bias current] |
| ESD Performance | — | 2 kV |
| 동작 온도 범위 | — | -40 C to +125 C |
| Packaging | — | Tape and reel |
| RoHS Compliance | — | RoHS compliant |
| REACH Compliance | — | Unknown |
| Lead-Free Status | — | Yes |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |