LM2903QDG4 vs LM2903VQDRG4Q1 비교
다음의 상세 나란히 비교: LM2903QDG4 제조: Texas Instruments 및 LM2903VQDRG4Q1 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
LM2903QDG4 - Dual Differential Comparator, 36 V | Texas Instruments
LM2903QDG4 ✓ 활성Texas Instruments
LM2903VQDRG4Q1 - 36V Automotive Dual Comparator | Texas Instruments
LM2903VQDRG4Q1 ✗ 단종사양 비교
| 파라미터 | LM2903QDG4 | LM2903VQDRG4Q1 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 수명 종료 |
| Comparator Type | Dual differential comparator | Dual differential voltage comparator |
| Number of Comparator Channels | 2 channels | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| 출력 유형 | Open-collector | Open-collector, rail-to-rail |
| Logic Compatibility | TTL, CMOS, and MOS compatible | — |
| Differential Input Type | Differential | — |
| 동작 온도 범위 | -40 °C to 125 °C | — |
| 패키지 | 8-pin SOIC, 3.90 mm width | 8-SOIC, 3.90 mm width |
| 실장 유형 | Surface mount | Surface mount |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | — |
| Independent Comparators | 2 independent channels | — |
| Differential Input Voltage Range | ±36 V | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Automotive Qualification | [DATA_NEEDED: automotive qualification status] | AEC-Q100 Grade 0 and Grade 1 |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Standard Tape-and-Reel Quantity | [DATA_NEEDED: standard tape-and-reel quantity] | — |
| Number of Independent Channels | — | 2 channels |
| Single-Supply Operating Range | — | 2 V to 36 V |
| Dual-Supply Operating Range | — | ±1 V to ±18 V |
| 공급 전류 | — | 0.4 mA typical per comparator |
| Propagation Delay | — | 0.3 us |
| ESD Protection, Human Body Model | — | Exceeds 1000 V per MIL-STD-883, Method 3015 |
| ESD Protection, Machine Model | — | Exceeds 100 V with C = 200 pF |
| Operating Mode | — | Single supply or dual supplies |
| Supply Voltage Difference for Dual Operation | — | 2 V to 36 V |
| Minimum VCC for Dual-Supply Operation | — | 1.5 V above the midpoint |
| Production Status | — | No longer in production |
| Packaging | — | Tape and reel |