LM2904NG vs LM2904N 비교

다음의 상세 나란히 비교: LM2904NG 제조: onsemi 및 LM2904N 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
LM2904N LM2904N - Dual 1 MHz 26 V Op Amp | Texas Instruments

LM2904N - Dual 1 MHz 26 V Op Amp | Texas Instruments

LM2904N ✓ 활성

사양 비교

파라미터 LM2904NG LM2904N
브랜드 onsemi Texas Instruments
카테고리 Amplifier ICs Amplifier ICs
수명 주기 상태 활성 활성
Amplifier Type General Purpose —
Number of Circuits 2 —
Gain Bandwidth Product 1 MHz —
Slew Rate 0.6 V/µs [DATA_NEEDED: slew rate]
Supply Voltage Range 3 V to 26 V [DATA_NEEDED: supply voltage range]
동작 온도 -40C to +105C —
패키지 / 케이스 PDIP-8 (0.300 in, 7.62 mm) —
실장 유형 Through Hole Through-hole
Packaging Tube —
Input Common-Mode Range Extends to ground/VEE —
Supply Type Single supply or split supply —
Frequency Compensation Internal —
공급 전류 [DATA_NEEDED: supply current per amplifier] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] [DATA_NEEDED: input offset voltage]
Input Bias Current [DATA_NEEDED: input bias current] [DATA_NEEDED: input bias current]
Output Current per Channel [DATA_NEEDED: output current] —
Amplifier Count — 2 amplifiers
Product Family Supply Designation — 26 V
Gain-Bandwidth Product — 1 MHz
토폴로지 — Dual independent operational amplifiers
Compensation — Internally frequency compensated
Supply Configuration — Single supply or split supply
Common-Mode Input Range — Extending to ground/VEE
Power Drain — Low; numeric value [DATA_NEEDED: power drain]
출력 유형 — Push-pull
패키지 — 8-pin PDIP
Input Type — Differential
Product Classification — Standard general-purpose amplifier
동작 온도 범위 — [DATA_NEEDED: operating temperature range]
Output Current — [DATA_NEEDED: output current]
RoHS 상태 — unknown
REACH Status — unknown
AEC-Q100 Qualification — not_applicable

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청