LM293DG vs LM2903D 비교
다음의 상세 나란히 비교: LM293DG 제조: onsemi 및 LM2903D 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LM293DG | LM2903D |
|---|---|---|
| 브랜드 | onsemi | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Precision, dual, independent | Dual differential comparator |
| Number of Comparators | 2 | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| 동작 온도 범위 | -25 C to +85 C | -40 °C to +125 °C |
| Input Offset Voltage | as low as 2.0 mV | [DATA_NEEDED: input offset voltage] |
| Response Time | 1.3 microseconds | 300 ns |
| 공급 전류 | 400 microamps | — |
| 출력 유형 | Open-collector / open-drain | Open-collector |
| Output Compatibility | CMOS, MOS, TTL, DTL, ECL | — |
| Common-Mode Input Range | Includes ground (single supply operation) | — |
| 패키지 | 8-SOIC (SOIC-8), 1.27 mm lead pitch | 8-pin SOIC |
| 실장 유형 | Surface Mount | Surface mount |
| Channel Independence | Fully independent channels | Two independent comparator channels |
| Input Common-Mode Range | Ground to (V+) - 1.5 V (typical single-supply behaviour) | — |
| Output Sink Current | [DATA_NEEDED: output sink current rating] | [DATA_NEEDED: output sink current] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Differential Voltage Range | [DATA_NEEDED: input differential voltage range] | — |
| Lead-Free / RoHS Status | [DATA_NEEDED: lead-free and RoHS status] | — |
| Number of Channels | — | 2 channels |
| Supply Configuration | — | Single supply or split supply |
| Output Logic Style | — | Open-collector, pull-up resistor required |
| Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| 대기 전류 | — | [DATA_NEEDED: supply current per channel] |
| Propagation Delay | — | 300 ns response time |
| Output High Voltage | — | [DATA_NEEDED: output high-level voltage with pull-up] |
| RoHS 상태 | — | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |