LM324D vs LM324DRG3 비교
다음의 상세 나란히 비교: LM324D 제조: Texas Instruments 및 LM324DRG3 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LM324D | LM324DRG3 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Quad general-purpose operational amplifier | General-purpose operational amplifier |
| Number of Amplifiers | 4 | — |
| Architecture | Four independent high-gain frequency-compensated operational amplifiers | — |
| Supply Voltage Range | 3 V to 36 V for B versions | — |
| Input Offset Voltage | Plus or minus 2 mV maximum for BA versions at 25 C | [DATA_NEEDED: input offset voltage for LM324DRG3] |
| ESD Protection | 2 kV HBM for B, BA, and K versions | — |
| Input Filtering | Internal RF and EMI filter for B and BA versions | — |
| Supply Configuration | Single supply or split supply | Single supply or split supply |
| Frequency Compensation | Internal | Internally frequency-compensated |
| 패키지 | 14-pin SOIC | 14-SOIC, 0.154 inch / 3.90 mm width |
| 실장 유형 | Surface mount | 14-pin surface-mount SOIC |
| Device Type | Low-power operational amplifier | — |
| Input Type | Differential input | — |
| 출력 유형 | Single-ended output | — |
| Operating Class | Standard general purpose | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | RoHS-compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Status | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current for LM324DRG3] |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.5 V/µs |
| Output Current | [DATA_NEEDED: output current] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | — |
| Output Swing | [DATA_NEEDED: output swing] | — |
| Number of Amplifier Circuits | — | 4 circuits |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Supply Current Drain | — | 0.8 mA typical |
| Channel Independence | — | 4 independent amplifiers |
| Package Type | — | Cut Tape (CT) |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Lead-Free Status | — | Lead-free |