LM324N vs LM324ADR2G 비교
다음의 상세 나란히 비교: LM324N 제조: Texas Instruments 및 LM324ADR2G 제조: onsemi. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LM324N | LM324ADR2G |
|---|---|---|
| 브랜드 | Texas Instruments | onsemi |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.00 | $0.18 |
| Amplifier Count | 4 independent amplifiers | — |
| Product Type | Low-power quad operational amplifier | — |
| Amplifier Class | Standard general-purpose amplifier | — |
| Architecture | High-gain, internally frequency-compensated amplifiers | — |
| Supply Configuration | Single-supply capable | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: Input Bias Current] |
| Voltage Gain | [DATA_NEEDED: voltage gain] | — |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input range] | — |
| Output Swing | [DATA_NEEDED: output swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.6 V/µs |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| 패키지 | 14-pin PDIP | — |
| 실장 유형 | Through-hole | Surface Mount |
| Frequency Compensation | Internal | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Amplifier Type | — | General Purpose |
| Number of Circuits | — | 4 |
| Supply Voltage Range (Single) | — | 3 V to 32 V |
| Supply Voltage Range (Split) | — | ±1.5 V to ±16 V |
| Gain Bandwidth Product | — | 1 MHz |
| Input Offset Voltage (Max) | — | 3 mV |
| Input Offset Voltage (Typ) | — | [DATA_NEEDED: Input Offset Voltage typical] |
| Technology | — | Bipolar |
| 패키지 / 케이스 | — | 14-SOIC (0.154in, 3.90mm Width) |
| 동작 온도 | — | 0C to +70C (Commercial) |
| Packaging | — | Tape & Reel (R2G suffix) |
| Supply Current (per amp, typical) | — | [DATA_NEEDED: Supply Current] |