LM393DR vs LM393DG4 비교
다음의 상세 나란히 비교: LM393DR 제조: Texas Instruments 및 LM393DG4 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
LM393DR - Dual Differential Comparator, 36V, Open-Collector SOIC-8 | Texas Instruments
LM393DR ✓ 활성사양 비교
| 파라미터 | LM393DR | LM393DG4 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 단가 (USD) | $0.11 | — |
| Manufacturer | Texas Instruments | — |
| Part Number | LM393DR | — |
| 기능 | Dual Differential Comparator | — |
| Number of Channels | 2 | 2 |
| 출력 유형 | Open-Collector | Open-collector |
| Supply Voltage (Single) | 2 V to 36 V | — |
| Supply Voltage (Dual) | ±1 V to ±18 V | — |
| Input Offset Voltage (typical) | 1 mV | — |
| Input Bias Current (typical) | 25 nA | — |
| Supply Current per Comparator | 0.4 mA (typical) | — |
| Response Time | 1.3 µs (typical) | — |
| Common-Mode Input Range | 0 V to VCC − 1.5 V | — |
| 동작 온도 범위 | 0 °C to +70 °C | [DATA_NEEDED: operating temperature range] |
| 패키지 | SOIC-8 (D), 3.90 mm body width | 8-pin SOIC |
| 실장 유형 | Surface Mount | Surface mount |
| ESD Rating (HBM, B-version) | 2 kV | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Comparator Type | — | Dual differential comparator |
| Supply Voltage Range | — | 2 V to 36 V |
| Tested Maximum Operating Voltage | — | 30 V for non-V devices |
| V-Suffix Tested Maximum Operating Voltage | — | 32 V |
| Propagation Delay | — | Approximately 0.3 us |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Supply Configuration | — | Single supply or dual supplies |
| Input Configuration | — | Differential inputs, two channels |
| 출력 구성 | — | Open-collector with external pull-up |
| Package Type | — | SOIC-8 |
| Commercial Grade | — | Commercial-grade applications |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |