LT1167IS8 vs INA128U 비교
다음의 상세 나란히 비교: LT1167IS8 제조: Analog Devices 및 INA128U 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
LT1167IS8 - Precision InAmp, Single-Resistor Gain, SOIC-8 | Analog Devices
LT1167IS8 ✓ 활성사양 비교
| 파라미터 | LT1167IS8 | INA128U |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Channels | 1 | — |
| Gain Range | 1 to 10,000 (single external resistor) | 1 to 100,000 |
| Input Voltage Noise Density | 7.5 nV/√Hz at 1 kHz | — |
| Maximum Offset Voltage | 60 µV | — |
| Slew Rate | 1.2 V/µs | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Supply Current (typical) | 0.9 mA | — |
| Supply Voltage Range | ±2.3 V to ±18 V | ±2.25 V to ±18 V |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| 동작 온도 | -40 °C to +85 °C (industrial) | — |
| 패키지 | 8-pin SOIC (SO-8) | 8-pin SOIC |
| ESD Protection (with 5 kΩ resistors) | IEC 1000-4-2 level 4 compliant | — |
| RoHS 상태 | Compliant (PBF suffix) | [DATA_NEEDED: RoHS status] |
| 실장 유형 | Surface Mount | Surface mount |
| MSL 레벨 | [DATA_NEEDED: MSL level] | — |
| Device Type | — | Precision low-power instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Number of Amplifiers | — | 1 amplifier |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| 대기 전류 | — | 700 µA |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Input Protection Range | — | ±40 V |
| Bandwidth at Gain 100 | — | 200 kHz |
| Maximum Slew Rate | — | 4 V/µs |
| Maximum Gain-Bandwidth Product | — | 1.3 MHz |
| 동작 온도 범위 | — | -40°C to +85°C |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |