LTC3310SIV-1#PBF vs LTC3310SIV-1#TRMPBF 비교
다음의 상세 나란히 비교: LTC3310SIV-1#PBF 제조: Analog Devices 및 LTC3310SIV-1#TRMPBF 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
LTC3310SIV-1#TRMPBF - 10A, 5.5V Sync Step-Down Silent Switcher 2 | ADI
LTC3310SIV-1#TRMPBF ✓ 활성사양 비교
| 파라미터 | LTC3310SIV-1#PBF | LTC3310SIV-1#TRMPBF |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | DC-DC Converters | DC-DC Converters |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.42 | $5.20 |
| 토폴로지 | Synchronous Buck (Step-Down) | Synchronous Step-Down (Buck) DC/DC Converter |
| 입력 전압 범위 | 2.25 V to 5.5 V | 2.25 V to 5.5 V |
| 출력 전압 범위 | 0.5 V to 5.5 V | — |
| 최대 출력 전류 | 10 A | 10 A |
| Architecture | Silent Switcher 2 with internal bypass capacitors | — |
| Peak Efficiency | 95% (typical, 1 MHz, 5 V to 1.8 V) | — |
| 스위칭 주파수 | Up to 5 MHz (programmable) | — |
| Output Voltage Accuracy | ±1% over line, load, and temperature | — |
| Reference | External reference (LTC3310S-1 variant) | — |
| Internal MOSFETs | Yes (high-side and low-side N-channel, with bootstrap diodes) | — |
| Control Mode | Peak current-mode with internal compensation | — |
| 패키지 | 18-LQFN (3 mm x 3 mm) with exposed pad | 18-lead LQFN, 3 mm x 3 mm, exposed pad (IV suffix) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 접합 온도 | -40 °C to +125 °C | — |
| MSL 레벨 | 1 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |
| RoHS 상태 | Compliant | Compliant (#TRMPBF suffix) |
| Clock Synchronization | Yes (external SYNC input) | — |
| Protections | Input OVP, output OVP, thermal shutdown, current limit | — |
| Output Voltage (LTC3310SIV-1) | — | 1 V fixed |
| Switching Architecture | — | Silent Switcher 2 with internal hot-loop bypass |
| Maximum Switching Frequency | — | 5 MHz (programmable) |
| Quiescent Current (Burst Mode) | — | < 1 uA typical |
| Efficiency (Peak) | — | [DATA_NEEDED: typical efficiency curve at VIN=5V VOUT=1V] |
| 동작 온도 범위 | — | -40 C to +125 C |
| Enable Input | — | Yes (active-high, low-Iq shutdown when low) |
| Output Voltage Remote Sense | — | AGND pin (Pin 2) for Kelvin feedback |
| Operating Modes | — | Burst Mode / Forced-Continuous / Pulse-Skipping (selectable via MODE pin) |