MAX132CWG+ vs MAX132CWG+C10203 비교
다음의 상세 나란히 비교: MAX132CWG+ 제조: Analog Devices 및 MAX132CWG+C10203 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
MAX132CWG+C10203 - 18-Bit+Sign Multi-Slope ADC | Analog Devices
MAX132CWG+C10203 ✓ 활성사양 비교
| 파라미터 | MAX132CWG+ | MAX132CWG+C10203 |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | Unknown | 활성 |
| Device Type | 18-bit plus-sign, serial-output analog-to-digital converter | — |
| Conversion Architecture | Multi-slope integration | Multi-slope integrating |
| 분해능 | 18 bit plus sign | 18 bit + sign (±18-bit equivalent) |
| Maximum Conversion Rate | 100 conversions/s | — |
| Full-Scale Input Range | ±512 mV | ±512 mV (2 µV/LSB) |
| Input Resolution | 2 µV/LSB | — |
| 인터페이스 유형 | 4-wire serial interface | — |
| Number of Inputs | 1 input | — |
| Input Type | Pseudo-differential | — |
| 패키지 | 24-pin wide SOIC, gull-wing lead form | — |
| Number of Terminals | 24 terminals | — |
| Package Code | SOP | — |
| Package Shape | Rectangular | — |
| Temperature Grade | Commercial | — |
| 공급 전압 | [DATA_NEEDED: supply voltage] | — |
| 기준 전압 | [DATA_NEEDED: reference voltage] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (commercial) |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| RoHS 상태 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | compliant | — |
| Conversion Rate | — | 100 SPS (max) |
| Input Channels | — | 1 differential |
| Output Interface | — | 4-wire synchronous serial |
| Analog Supply Voltage | — | ±5 V (dual supply) |
| Digital Supply Voltage | — | +5 V |
| Conversion Noise | — | Low (integrating architecture) |
| Package Type | — | 24-pin SOIC (wide-body / WSOIC) |
| 실장 유형 | — | Surface Mount |
| MSL 레벨 | — | [DATA_NEEDED: MSL level] |
| Input Common-Mode Range | — | Within AVDD rails (per datasheet) |
| On-Chip Reference | — | No (requires external reference) |
| Calibration | — | Factory-trimmed (C10203 suffix denotes calibration code) |